Tool:
2 Double Open End Wrenches
Step1
Position the Cross Bar (3) onto both Left/Right Base Frames (1, 2) and align bolt holes.
Attach the Cross Bar (3) onto both Left/Right Base Frames (1, 2) with two Cross Bar
Support Plates (4), four M10x70 Hexagon Head Bolts (16), four Ø10.5xØ20x1.5t
Washers (17), and four M10 Nylon Lock Nuts (18). Tighten bolts and nylon lock nuts
with two Double Open End Wrenches provided.
Hardware:
(4) Cross Bar Support Plate
2 PCS
(17) Washer
Ø10.5xØ20x1.5t
4 PCS
ASSEMBLY
S13, S17
8
(16) Hexagon Head Bolt
M10x70
4 PCS
(18) Nylon Lock Nut M10
4 PCS