Rohs; Other Approvals; Emc And Environmental Type Tests - Siemens SIMATIC NET RUGGEDCOM RST2228 Installation Manual

Certification
6.1.8 RoHS
6.1.8

RoHS

This device is declared by Siemens AG to meet the requirements of the following
RoHS (Restriction of Hazardous Substances) directives for the restricted use of certain
hazardous substances in electrical and electronic equipment:
•
A copy of the Material Declaration is available online at
support.industry.siemens.com/cs/ww/en/view/109738831.
6.1.9

Other Approvals

This device meets the requirements of the following additional standards:
•
•
•
•
•
6.2

EMC and Environmental Type Tests

The RUGGEDCOM RST2228 has passed the following EMC and environmental tests.
EMC Type Test for IEC 61850-3
Note
•
•
42
China RoHS 2
Administrative Measure on the Control of Pollution Caused by Electronic
Information Products
IEC 61850-3
General Requirements
EN 50121-4
Railway Applications – Electromagnetic Compatibility – Emission and Immunity
of the Signaling and Telecommunications Apparatus
EN 50121-3-2
Railway applications – Electromagnetic compatibility – Part 3-2: Rolling stock –
Apparatus
EN 50155
Railway applications – Rolling stock – Electronic equipment
NEMA TS-2
Traffic Controller Assemblies with NTCIP Requirements
In the case of an all fiber port configuration, this product meets all Class 2
requirements. Otherwise, all Class 1 requirements are met for copper ports and
mixed fiber/copper ports.
If the unit contains copper ports, the IEC 61850-3 and IEEE 1613 conformance is
Class 1, during which disturbance errors may occur but recovery is automatic.
https://-
RUGGEDCOM RST2228
Installation Manual, 08/2020, C79000-G8976-1359-10