Rohs; Other Approvals; Emc And Environmental Type Tests - Siemens SIMATIC NET RUGGEDCOM RS900 Equipment Manual

Certification
6.1.9 RoHS
6.1.9

RoHS

This device is declared by Siemens Canada Ltd. to meet the requirements of the
following RoHS (Restriction of Hazardous Substances) directives for the restricted use
of certain hazardous substances in electrical and electronic equipment:
•
•
Declarations of conformity for each directive are available online via
Industry Online Support
6.1.10

Other Approvals

This device meets the requirements of the following additional standards:
•
•
•
•
6.2

EMC and Environmental Type Tests

The RUGGEDCOM RS900 has passed the following Electromagnetic Compatibility
(EMC) and environmental tests.
EMC Type Tests
61000-4-2
61000-4-3
61000-4-4
34
EU RoHS Directives (EU) 2011/65 and (EU) 2015/863
European Directive for Restriction of Hazardous Substances
China RoHS (relating to SJ/T 11364)
Management Methods for the Restriction of the Use of Hazardous Substances in
Electrical and Electronic Products
[https://support.industry.siemens.com/].
IEEE 1613
IEEE Standard Environmental and Testing Requirements for Communications
Networking Devices in Electric Power Substations
IEC 61000-6-2
Electromagnetic Compatibility (EMC) – Part 6-2: Generic Standards – Immunity
for Industrial Environments
IEC 61850-3
Communication Networks and Systems in Substations – Part 3: General
Requirements
NEMA TS-2
Traffic Controller Assemblies with NTCIP Requirements
Test
IEC ESD
IEC Radiated RFI
IEC Burst (Fast Transient)
Description
Enclosure
Contact
Enclosure Air
Enclosure
Ports
Signal Ports
Siemens
Test Levels
± 8 kV
± 15 kV
20 V/m
± 4 kV @ 2.5 kHz
RUGGEDCOM RS900
Equipment Manual, 11/2023, C79000-G8976-1024-16
Severity
Levels
4
4
x