Before Installation; Unpacking The Stove - Heta Scan-line 7 Series Operating And Installation Instructions

Congratulations on your new stove. We confident that you will be more than satisfied with your new
Heta stove, especially if you follow the advice and instructions we have put together in these ope-
rating instructions.
The Scan-Line 7 series series have been approved per the EN 13240, NS 3058/3059 and 15a B-VG
and the Scan-Line 7 SCA series are modified so that they are also recommended as exempt for use
within smoke control areas (SCA) throughout the UK (see clean air act Appendix A). of the air supply
regulation so that it can't be closed completely.
Approval means that consumers can be sure, that the stove meets a range of specifications and
requirements intended to ensure that the materials used are of good quality, that the stove does not
adversely affect the environment, and hat it is economical to use.

Before installation

Heta wood stoves are quality products, therefore, your first impression is very important! We have
a good logistics network, which transports Heta products with great care for our dealers. Neverthe-
less, when in transport or handling, damage of the often-heavy stoves can occur. It is important that
upon receipt check your Heta product completely and report any damage or defects to your dealer.
The packaging must be disposed of as follows:
Wood is untreated and able to burn in the stove.
Plastic and cardboard you can drop off at your local recycling center.

Unpacking the stove

Heta A/S
Jupitervej 22,
DK-7620 Lemvig
Phone: +45 9663 0600
E-mail: heta@heta.dk
Copyright © 2014
Heta is a registered
trademark of Heta A/S
Printed in Denmark
Subject to printing errors
and changes.
06.08.2020
0037-1305 Version 1,2
3