Cup Holder Grille; Commissioning; Safety Precautions; Preparing The Filter Holders - Astoria STORM BARISTA ATTITUDE SAEP 2GR Use And Maintenance Manual

For Australia - When connecting the appliance to the mains,
a device must be provided for which ensures an omnipolar
disconnection from the mains with a contact opening distance in
the conditions of overvoltage category III and in accordance with
the AS/NZS 3000 regulations.

Cup holder grille

5.9
IT is possible to adjust the height of the cup support
grille on one of the 3 available levels, proceed as follows:
1. Unscrew the shelf fixing screws (1);
2. Raise or lower the support surface to the desired
level;
3. Tighten the screws to fix the shelves;
1
STORM 4000 (2GR)
REGOLAZIONE SUPPORTI BACINELLA
4. Once fixed, correctly align the basin to the work
surface, using the 2 supports fixed under it (2).
30 92
of
2
6.

COMMISSIONING

Safety precautions

6.1
Carefully read the instructions provided in chapter "I. SAFETY
PRECAUTIONS" on page 3.

Preparing the filter holders

6.2
6.2.1 Filter holders
• Place the filter-holding spring (2) in the housing of
the filter holder (4).
• Take the one-cup (1) or two-cup filter (2) and press it
firmly into the filter holder.
6.2.2 Spouts
To finish preparing the filter holder, fit the one-cup
(5) or two-cup (6) spouts.
2
4
6
Properly connect the single filter with the single spout and the
double filter with the double spout.

Coffee grind

6.3
To adjust the coarseness of the ground coffee, use the
appropriate regulator located on the grinder-dispenser
hopper.
1
3
5
TECHNICIANS manual