FIOR & GENTZ NEURO MATIC Manual page 23

Risk of Falling Due to Loosely Attached Cover Plate
Mount the cover plate to the system joint according to the assembly instructions in this manual. Secure the
screws with the specified torque and the corresponding adhesive and make sure that no sliding washers are
damaged in the process.
Risk of Falling Due to Permanent Higher Load
If patient data has changed (e.g. due to weight gain, growth or increased activity), recalculate the load
capacity of the system joint. For this purpose, use the Orthosis Configurator or contact Technical Support.
Risk of Falling Due to Improper Shoe/Wrong Shoe Pitch
Advise the patient to wear a shoe to which the orthosis is adjusted in order to avoid joint dysfunction in
Auto mode.
Risk of Falling Due to Improper Maintenance
Follow the instructions in this manual and gather information about joint-specific particularities before
maintenance of the system joint. To do so, attend one of our production technique workshops, refer to the
online tutorials on our website or contact Technical Support.
Risk of Falling Due to Walking Incorrectly with Orthosis
Make sure that the patient is able to handle their orthosis. Recommend them a physiotherapeutic gait
re-education and explain them the system joint's particularities.
Damage to the Anatomical Joint Due to Incorrect Position of the Joint's Mechanical Pivot Point
Determine the joint's mechanical pivot points correctly in order to avoid a permanent incorrect load on the
anatomical joint. Please refer to the online tutorials on our website or contact Technical Support.
Jeopardising the Therapy Goal Due to Lack of Free Movement
Check if the system joint moves freely in order to avoid restrictions of the joint function. Use suitable slid-
ing washers according to the information in this manual.
WARNING
WARNING
WARNING
WARNING
WARNING
WARNING
WARNING
23