Setting The Encoding Format For Audio & Video - JVC BD-X201M Instructions Manual

Hide thumbs Also See for BD-X201M:
Table of Contents

Advertisement

Available languages

Available languages

Settings & Controls for Recording
Setting the Encoding Format for Audio & Video
The setting of encoding formats for audio and video is carried out from the RECORDER MENU (1/2) screen as described below.
SET UP button
SET button
RECORDER MENU (1/2) screen
RECORDER MENU (1/2)
MENU
CHAPTER CREATION
SET INTERVAL
AUTO CHAPTER (RECPAUSE)
ENCODE QUALITY
AUDIO ENCODE
Video Encoding
Item
ENCODE QUALITY
Audio Encoding
AUDIO ENCODE
This parameter is used to set the encoding format for audio data.
NO AUDIO
: Do not record audio sound.
LPCM
: Linear PCM encoding
DOLBY DIGITAL : Dolby AC3 encoding.
MPEG
: MPEG encoding (Effective only when the TV TYPE item from SYSTEM MENU (2/2) screen is set to PAL.)
Note
If the SET UP button is pressed while in Recording mode, the video encode quality and audio encoding format will be displayed
on-screen. Press the SET UP button once again to hide this information.
46
Setting Encoding Formats
Stop the DVD recorder.
1.
Open the RECORDER MENU (1/2) screen.
1Press the SET UP button to display the Setup Menu.
2Select RECORDER using the M and N buttons and then press the SET
button.
2.
Make the required settings on the RECORDER MENU (1/2) screen.
1Select the parameter to be set using the M and N buttons, and then press
the SET button to display a list of possible settings.
2Select the required setting using the M and N buttons, and then press the
SET button to adopt it.
MANUAL
Every05Min
3.
ON
Complete the setting process.
SP
To do so, carry out one of the following procedures.
DOLBY DIGITAL
• Select MENU and press the SET button to return to the Setup Menu.
• Press the SET UP button to return to the normal screen display.
For setting the recording quality. Recording quality and time vary with the set values as follows:
(For a 4.7 GB disc)
Set Value
UXP (NOT DVD VIDEO)
XP
SP
LP
EP
DLP (Double LP)
DEP (Double EP)
* Only UXP, XP or SP can be selected when the AUDIO ENCODE item is set to LPCM.
Description
Recording Time
Picture
40 mins
High
60 mins
120 mins
Normal
180 mins
240 mins
360 mins
Low
480 mins
Quality Upload Size
D1: NTSC = 720 × 480 dots
PAL = 720 × 576 dots
x
y
HalfD1: NTSC = 352 × 480 dots
y
PAL = 352 × 576 dots

Advertisement

Chapters

Table of Contents
loading

Table of Contents