Event Messages - JVC BD-X201M Instructions Manual

Event Messages

Event messages are displayed on the DVD recorder's LCD display and on the monitor when incorrect operations are attempted.
These messages will remain on-screen for approximately 3 seconds.
Monitor screen
TITLE FULL
04/05/06
CHAPTER 01 0:11:22
11:20:00
LCD display
Monitor message
message
INVALID TV INVALId TV
TITLE FULL TITLE FULL
INDEX FULL INdEX FULL
CHAPTER FULL CHAP FULL
NOT FINALIZE NoT FINAL
A L-xxxx-R
d L-xxxx-R
OPE LOCK oPE LoCK
000 min
Event messages:
Displayed
DISPLAY from the
DISPLAY
screen is set to
ON.
REC
TITLE 01 0:11:22
A signal of an invalid format has been input.
Alternatively, an attempt has been made to play a disc containing signals of an
invalid format.
Recording was attempted on a disc already containing 99 titles.
An attempt was made to add a index to a title already containing 99 indexes.
An attempt was made to add a chapter to a title already containing 99 chapters.
An attempt was made to eject a disc before it was finalized.
Set value is displayed when changing the recording level of analog audio.
Set value is displayed when changing the recording level of digital audio.
This is displayed when buttons on this unit are operated while the Operation Lock is
activated. Operation Lock can be canceled by setting the OPERATION LOCK item
on the SYSTEM MENU (2/2) screen to OFF.
LCD Display and On-Screen Content
when
MENU
Description
LCD display
Event message
33