Using A Keyboard; Attach The Provided Ferrite Core - JVC BD-X201M Instructions Manual

Preparation

Using a Keyboard

Menu settings, the title and chapter settings, and other DVD recorder settings are carried out from setting screens displayed on
the TV or monitor.
Although the DVD recorder's buttons are used in setting and operation screens, a keyboard can be used as an alternative.
Connections
Connect a USB keyboard to the USB terminal on the back of the DVD recorder.
This DVD recorder has the two USB terminals.
Recommended manufacturers: Logitech

Attach the provided ferrite core

• Attach the ferrite core as shown in the diagram to reduce
unwanted electromagnetic emissin.
• Attach the ferrite core as shown in the diagram to this DVD
recorder as near as possible.
The wire clamp
Procedure
The following functions can be controlled using the keyboard.
Function Front panel
Selection of
menu items or
setting values
Confirmation of
SET button
settings
The entry of names and comments for the title and chapter menus is carried out using the keyboard. (Set KEYBOARD STYLE
from the SYSTEM MENU (1/2) screen in accordance with the keyboard's input language.)
38
The provided ferrite core
Wind the cable once around the
ferrite core.
Keyboard
K button r key
L button q key
M button x key
N button y key
Enter key
Note
Unless otherwise specified, this user's manual describes proce-
dures carried out from the DVD recorder itself.
USB terminal