Sma Radio-Controlled Socket - SMA SUNNY HOME MANAGER Installation Manual

4 Product Description
Status LED
LED status
Glowing green
Further states of the status LED are described in the section "Troubleshooting" (see Section 9.1.2
"States of the Status LED", page 47).
Bluetooth LED
LED status
Glowing blue
Further states of the Bluetooth LED are described in the section "Troubleshooting" (see Section 9.1.3
"States of the the Bluetooth LED", page 49).

4.3 SMA Radio-Controlled Socket

The SMA radio-controlled socket supports load control in households with the
Sunny Home Manager. For this purpose, the SMA radio-controlled socket carries out the following
tasks:
• Converting control commands of the Sunny Home Manager
• Measuring the energy consumption of the connected loads
• Improving the wireless connection between Bluetooth devices
Converting control commands of the Sunny Home Manager
The Sunny Home Manager can switch the SMA radio-controlled socket on and off. As a result,
specific electrical devices can be switched on if e. g. a lot of PV power is available.
The times at which the Sunny Home Manager switches the SMA radio-controlled socket on or off
depend on the configuration of the SMA radio-controlled socket (see user manual
"Sunny Home Manager in the Sunny Portal").
Measuring the energy consumption of the connected loads
The SMA radio-controlled socket measures the energy consumption of the connected loads.
Improving the wireless connection between Bluetooth devices
If the distance between Bluetooth devices is too great or obstructions interfere with the Bluetooth
connection, the SMA radio-controlled socket can be used as a repeater. This closes the dead zone.
22 HoMan-IA-en-13
Explanation
The Sunny Home Manager is connected to the Bluetooth devices and the
Sunny Portal.
Explanation
The Bluetooth connection to the devices of the PV plant is good.
SMA Solar Technology AG
Installation Manual