Table of Contents
Advertisement
8 Commissioning
8. Activate the checkbox of the devices you would like to add to the Sunny Home Manager plant.
Tip: you can identify devices using the previously noted serial numbers.
9. Select [Add] to add Bluetooth devices to the Sunny Home Manager plant immediately.
☑ The plant password is assigned to the devices. This process can take several minutes.
The devices are then shown with a green tick:
✖ Are some devices shown with a warning symbol:
Sunny Home Manager cannot access the devices. You may have entered an invalid plant
password or the connection to the devices could not be established.
• See troubleshooting (see Section 9.3 "Errors During Registration in Sunny Portal",
page 51).
Select [Next].
☑ The "Meter Configuration" window opens.
or
10. Select [Skip forward] to add Bluetooth devices to the Sunny Home Manager plant at a later
time and continue with registration. Tip: you can add Bluetooth devices as new devices to the
Sunny Home Manager plant after registration (see "Sunny Home Manager in Sunny Portal"
user manual).
☑ The "Meter Configuration" window opens.
Configuring energy meters
1. If energy meters have been connected to the Sunny Home Manager, select the energy meter
type connected to the respective meter input in the drop-down lists "Meter input 1",
"Meter input 2" and "Meter input 3":
Type of connected energy meter
Energy meter with D0 interface
Bidirectional meter with D0 interface
Energy meter with an S0 interface
No energy meter
2. Select [Next].
☑ The "Extended Plant Properties" page opens.
44
HoMan-IA-en-13
.
?
Drop-down list
• Select D0.
• Select D0.
• Activate the Bidirectional meter
(supply and feed-in) field.
☑ The "Meter input 2" area is greyed
out.
• Select S0.
• In the "S0 pulses/kWh" text field, enter
the pulse rate of the energy meter
(see the energy meter manual)
• Select no meter.
SMA Solar Technology AG
Installation Manual
Advertisement
Table of Contents
