SMA SUNNY HOME MANAGER Installation Manual page 46

8 Commissioning
1.
Requirement for "Automatic" mode
You can only set "Automatic" mode if you have configured the SMA radio-controlled
socket for the connected load in the Sunny Portal.
• If the SMA radio-controlled socket was not registered together with the
Sunny Home Manager in the Sunny Portal, add the SMA radio-controlled socket to
the plant as a new device (see user manual "Sunny Home Manager in the
Sunny Portal").
2. Keep tapping the touch key until the upper horizontal LED displays the desired operating mode:
Operating mode
"Manually switched on"
"Automatic"
"Manually switched off"
3. To adopt the operating mode, wait approximately one second. During this time, do not press
the touch key.
☑ After approximately two seconds, the SMA radio-controlled socket audibly switches to the
selected operating mode.
46 HoMan-IA-en-13
LED status
Glowing green
Off (subsequently flashes orange)
Glowing orange
SMA Solar Technology AG
Installation Manual