Setup; Date And Time - VTech SN5147 User Manual

Setup

Date and time

After you install your telephone or power returns following a power outage and battery
depletion, the handset will prompt you to set the date and time, and to configure the
Smart call blocker and answering system through the voice guides.
Follow the steps below to set the date and time. For example, if the date is
31 December, 2023, and the time is 10:59 PM:
MM/DD/YY
01/01/23
When the
handset prompts
1
you to set the
date and time...
Enter the month (MM),
day (DD), and year (YY).
MM/DD/YY
HH:MM
12/31/23 12:00 AM
2 3
Press SELECT. Enter the hour (HH) and
minute (MM).
8
HH:MM
HH:MM
10:59 AM
10:59 PM
4
5
Press any number key
Press SELECT to save.
to toggle between AM
and PM.
If you subscribe When the handset is not in use:
to caller ID
1. Press MENU.
- OR -
service, the
2. Press
day, month and
Set date/time.
time are set
3. Press SELECT, and then
automatically
follow the Date and time
with each
steps to set the date and time.
incoming call.
Make sure you set the date
and time including the year
correctly; otherwise the
answering system does not
announce the correct day of
the week for your recorded
messages time stamp.
Ringers
or to scroll to >Set date/time
9