Connecting To Phone Line; Checking For Dial Tone; Tone/Pulse Selection - VTech i 5836 Manual

IMPORTANT:
1. Do not dispose of a battery pack in a fire, the cell may explode.
2. Do not open or mutilate the battery pack. Toxic substances may be released,
causing harm to eyes or skin.
3. Exercise care in handling battery packs in order to prevent an accidental short
of the charge contacts, potentially causing the battery pack to overheat.
Do not dispose of this battery pack into household garbage.
4.

Connecting to Phone Line

Plug one end of the telephone line cord into the jack
on the bottom of the Base Unit. Plug the other end of
this cord into the wall jack.

Checking for Dial Tone

After the battery is charged press ON on the Handset.
The Phone icon
display, and you will hear dial tone. If not, see In
Case of Difficulty.

Tone/Pulse Selection

Your i 5836 is preset for tone dialing. If you want to change
your dialing mode, see the Tone/Pulse section for details.
CAUTION: Use only the VTech power supply provided with your telephone.
IMPORTANT:
FOR MAXIMUM PERFORMANCE
OFYOUR CORDLESS TELEPHONE SYSTEM:
1. Choose a central location for your Base Unit.
2. Install your Base Unit and Extension Handsets
away from electronic equipment, such as
personal computers, television sets and
microwave ovens.
3. In locations where there are multiple cordless
telephones, separate Base Units as much
as possible.
4. Install your telephone equipment away from
heat sources and sunlight.
5. Avoid excessive moisture, dust or extreme
cold.
will appear on the Handset
9