Setup; Connecting To Phone Line; Checking For Dial Tone - VTech VT5831 Manual

1. Plug the AC power adapter into an electrical outlet, and the DC connector
into the back of the base unit.
To AC outlet

Connecting to phone line

Plug one end of the telephone line cord into the jack on the back of the base
unit. Plug the other end of this cord into the wall jack.

Checking for dial tone

After the battery is charged press ON on the Handset. The Phone icon
appear on the handset display, and you will hear dial tone. If not, see In Case
of Difficulty.
Tone/Pulse selection
See BASE SETTINGS for details.
CAUTION: Use only the Vtech power supply provided with your telephone.
IMPORTANT:
FOR MAXIMUM PERFORMANCE OF YOUR
CORDLESS TELEPHONE SYSTEM:
1. Choose a central location for your Base Unit.
2. Install your Base Unit and Extension Handsets
away from electronic equipment, such as
personal computers,
microwave ovens.
3. In locations where there are multiple cordless
telephones, separate base units as much as
possible.
4. Install your telephone equipment away from
heat sources and sunlight.
5. Avoid excessive moisture, dust or extreme
cold.
To telephone
socket outlet
To telephone
jack
television sets and
7

Setup

AC adapter
will