Spare Battery Charger/Power Backup Feature; Installation - VTech i 5836 Manual

Spare Battery Charger/Power Backup Feature

i 5836
The uses the spare battery charger in the Base Unit to provide operational
backup in the event of a power failure. With a fully charged battery pack in the
spare battery charger, you will still be able to place and receive calls from the
Handset only, for up to 2 1/2 hours.
The spare battery pack can also be used to replace a drained Handset battery, ensuring
uninterrupted use. The spare battery pack is optional and purchased separately.
NOTE: When using the i 5836 during Power Backup mode, audio quality
may be compromised due to reduced power availability.
To order battery packs, headsets and additional Handsets (model i 5801 or VT 5820),
call VTech Customer Service at:
In Canada, call

Installation

1. Open the spare battery charger by
pressing the release button, located
on the left-hand side of the Base
Unit. A drawer will open to reveal
the spare battery compartment.
2. Place a battery pack in the drawer
with the charge contacts facing up
and to the right.
3. Push the drawer closed.
The spare battery charger takes 24
hours to fully charge a drained battery.
1-800-595-9511.
1-800-267-7377.
10