Connecting To Phone Line; Checking For Dial Tone - VTech IP 5825 Manual

Connecting to phone line

Plug one end of the telephone line cord into the jack on the back of the Base Unit.
IMPORTANT:
Plug the other end of this cord into the wall jack.

Checking for dial tone

After the battery is charged, press ON on the Handset. The LCD displays ACTIVE
and shows a call timer. and you will hear dial tone. If not, see In Case of Difficulty.
Tone/Pulse selection
Your phone is preset for tone dialing. See Handset Settings for details.
CAUTION: Use only the VTech power supply provided with your telephone.
FOR MAXIMUM PERFORMANCE OF
YOUR CORDLESS TELEPHONE SYSTEM:
1. Choose a central location for your Base
Unit.
2. Install your Base Unit and Extension
Handsets way from electronic equipment,
such as personal computers, television
sets and microwave ovens.
3. In locations where there are multiple
cordless telephones, separate Base
Units as much as possible.
4. Install your telephone equipment away
from heat sources and sunlight.
5. Avoid excessive moisture, dust or ex-
treme cold.
HAC FCC ID: EW780-5348-00
9
Setup
CORDLESS TELEPHONE
VTECH TELECOMMUNICATIONS LTD.
DC 9V 600mA
CLASS 2 POWER SOURCE ONLY
VTech Customer Service 1-800-595-9511
www.vtechphones.com