Safety Hints WARNING Read all instructions before using this appliance Do not operate upright on deeply padded, plush or shag carpet. Damage to ■ both carpet and upright may result. Keep children away from the upright. There are obvious pinch points and other ■...
Page 4
Assembly Instructions STEP 1: 1. Locate the Console Mast (2) and slide on the Console Mast Cover (60). Make sure the cover is facing the correct direction, as shown below, before sliding onto mast. Install the wiring harness (80) into the bottom of the mast and out the top. Be careful when installing the console mast to the mainframe so as not to pinch or cut the wiring harness, damage to the console may occur.
Page 5
STEP 2: 1. Install Handle Bar (3) on Console Mast (2) and lock with Quick Release lever (19). In the mean time, get the Handpulse Wire (82),Go through the console mast (2) and use wire grommet (88) to fix the handpulse wire (82) in the mast (2). 2.