Advertisement
Statement
User Manual
4. Motor adjustment
1.
Push the motor pulley over the motor spindle and lock
in place by gently tightening the three screws in the side
of the pulley.
(If not already factory adjusted)
Pic. 20: Setting the motor pulley
2.
Place the drive belt first around the lower drive platter
and then around the motor pulley.
Back view
Pic. 21: Placing the drive belt
3.
Plug the supplied Statement power supply first into the back of the motor, and finally into the
mains supply.
4.
To assembly the tonearm please refer to the instruction manual of the manufacturer.
Statement
The set-up of your
turntable is now complete!
Statement
clearaudio wish you al lot of pleasure and musical enjoyment with your
!
clearaudio electronic GmbH 2008
Page 16
Advertisement
