Installing The Hoses - Toro 41339 Installation Instructions Manual

8

Installing the Hoses

Parts needed for this procedure:
1 Suction hose
1 Rinse tank suction hose
1 Rinse nozzle hose
3 Retainer fork, small
1 Retainer fork, large
3 Plastic tie
Procedure
8
4
1. Main tank
2. Rinse tank
3. Suction hose
4. Rinse tank suction hose
Installing the Suction Hose
1. Locate suction hose in loose parts.
2. Install the hose from the main tank upper port to
the main tank side of the rinse tank rinse valve
(Figure 26).
11
7
3
12
7
11
9
10
6
4
5
5. Check valve
6. Correct flow direction
7. Rinse nozzle hose
8. Rinse tank valve
3
13
Figure 26
9. Rinse nozzle valve
10. Boom supply hose, existing
11. Retainer fork, small
12. Retainer fork, large
3. Secure one end of the hose with the existing, extra
large retainer fork to the upper port on the main
tank.
4. Secure the other end of the hose to the rinse tank
valve with a large retainer fork from loose parts.
Install the Rinse Tank Suction Hose
1. Locate rinse tank suction hose from the loose parts.
13
1 2
11
4
G005803
13. Plastic tie