Advertisement
1. Supply tee mounting
bracket
2. Control valve bracket
7. Secure the supply tee bracket and control valve
bracket to the mounting frame using the bolts you
removed in 5 (Figure 6).
8. Secure the supply tee bracket and control valve
bracket using the screws you removed in step 2.
9. Secure the control valve to the bracket with two
Phillips screws.
10. Install the support bracket as shown in Figure 7,
using 4 flange-head bolts (1/4 x 3/4 inch) and 4
flange nuts (1/4 inch).
4
1
4
1. Control valve bracket
2. Support bracket
11. Connect the large adapter end of the tee assembly to
the control valve (Figure 8).
4
2
3
1
G005783
Figure 6
3. Bolt
4. Mounting frame
3
2
G005784
Figure 7
3. Flange-head bolt (1/4 x
3/4 inch)
4. Flange nut (1/4 inch)
Tee assembly shown exploded
1. Adapter
2. Large plastic nut
3. Large O-ring
4. Tee
12. Turn the large plastic nut to secure the tee assembly
to the control valve (Figure 8).
13. Wrap Teflon tape around the threads of the pressure
gauge (Figure 9).
1
2
G005786
1. Pressure gauge
2. Wrapped threads
14. Install the pressure gauge into the open port to the
right of the control valve (Figure 9).
6
6
5
3
4
2
3
1
G005785
Figure 8
5. Reducer assembly
6. Plastic nut
7. Reducer nipple
3
4
Figure 9
3. Long hose
4. O-ring, small clear
7
Advertisement
