Setup
Loose Parts
Use the chart below to verify that all parts have been shipped.
Procedure
1
2
3
4
5
6
1
Raising the Roll Bar
No Parts Required
Procedure
Raise the roll bar; refer to
20).
2
Installing the Mower Deck
Parts needed for this procedure:
1
Mower deck Installation Instructions
Procedure
Install the mower deck using the Installation
Instructions for that mower deck.
Description
No parts required
Mower deck Installation Instructions
No parts required
No parts required
No parts required
No parts required
Raising the Roll Bar (page
Qty.
–
Raise the ROPS.
1
Install the mower deck.
–
Adjust the left, front caster wheel.
–
Check the tire pressure.
–
Install weights.
Check the hydraulic fluid, engine oil,
–
and coolant levels.
3
Adjusting the Left, Front
Caster Wheel
No Parts Required
Procedure
Adjust the left, front caster wheel to the outside
position for 72-inch mower decks and to the inside
position for 60-inch and 62-inch mower decks.
4
Checking the Tire Pressure
No Parts Required
Procedure
Check the tire pressure; refer to
Pressure (page
41).
Important:
Maintain pressure in all tires to
ensure a good quality-of-cut and proper machine
performance. Do not underinflate the tires.
11
Use
Checking the Tire