Product Specifications; Intended Use - F.F. Group CMG 12V EASY Original Instructions Manual

12 | English
or other obscured areas. The inserted cutting disc may cut into gas or
water pipes, electrical wiring or other objects that can cause kickback.
SUPPLEMENTARY SAFETY INSTRUCTIONS FOR GRINDING AND ABRA-
SIVE CUTTING
Special safety instructions for working with wire brushes:
a. Be aware that the brush can lose wire bristles even during normal oper-
ation. Do not overstress the wires by applying excessive pressure to the
brush. The wire bristles can easily penetrate light clothing and/or skin.
b. Allow the brush to run at working speed for at least one minute before
applying it to the workpiece. Ensure that no one is standing in front of
or in line with the brush during this time. Loose pieces of wire could fly
off during the run-in period.
c. Aim the rotating steel brush away from yourself. When working with
these brushes, small particles and minute pieces of wire can fly off at
great speed and pierce skin.

PRODUCT SPECIFICATIONS

INTENDED USE

This cordless multi rotary tool is intended for drilling, milling, engraving,
polishing, cleaning, grinding, cutting of materials such as wood, metal,
plastics, ceramics and stone in dry rooms using the corresponding attach-
ments (as supplied). Any other usage of or modification to the appliance
is deemed to be improper and carries a significant risk of accidents. The
manufacturer accepts no responsibility for damage(s) attributable to mis-
use.
IDENTIFICATION
1. On/Off switch
2. Speed regulator
3. Battery LED
4. Battery
5. Battery release button
6. Tensioning nut
7. Cap nut
8. Spindle lock
9. Charging cradle
10. Mains adapter
11. (x6) HSS drill bits
12. (x2) mandrels as tool holders
13. (x3) polishing discs
14. (x4) grinding discs
15. (x1) metal brush
16. (x16) cutting discs
17. (x5) collet chucks
18. (x2) synthetic brushes
19. (x3) milling bits
20. (x2) engraving bits
21. (x5) grinding bits
22. (x1) combination spanner