Nautilus Bowflex VeloCore Assembly And Owner's Manual page 10

4. Install the Seat Assembly to the Frame Assembly
NOTICE: Make sure the Seat Adjustment Handle is fully tightened to secure the Seat Assembly on the Seat Stem. When fully tightened, the Adjustment
Handle must point rearward.
Note: To adjust the seat after the handle is tightened, loosen the handle. Move the seat to the desired position and tighten the handle. Pull the handle
out to disengage and turn so that it points rearward, then release.
7
8
X2
4mm
*
9
10
Assembly / Owner's Manual