Remote Heart Rate Monitor - Nautilus Bowflex VeloCore Assembly And Owner's Manual

USB Charging
If a USB Device is attached to the USB Port, the Port will attempt to charge the Device. The power supplied from the USB Port may not be enough to
operate the Device and charge it at the same time.
Bluetooth Heart Rate Enabled
®
Your fitness machine is equipped to be able to receive a signal from a Bluetooth
Bluetooth HR monitor.
®
If you have a pacemaker or other implanted electronic device, consult your doctor before using a Bluetooth
Bluetooth heart rate monitor.
®
Note: Be sure to remove the protective cover (if provided) from the Heart Rate Sensor before use.
Bluetooth Heart Rate Armband
®
A Bluetooth Heart Rate Armband is provided with your fitness machine. To use the Bluetooth
®
included with the Armband.
If you have a pacemaker or other implanted electronic device, consult your doctor before using a Bluetooth
Bluetooth heart rate monitor.
®
Note: Be sure to remove the protective cover (if provided) from the Heart Rate Sensor before use.
1. Put the Bluetooth Heart Rate Armband onto the upper portion of your forearm.
®
2. Confirm that Bluetooth wireless connection is active on the machine. If the Bluetooth
®
If the icon is red, then Bluetooth
a. Tap the Bluetooth icon.
®
b. Tap "Manage Bluetooth
c, Slide the option from "OFF" to "ON".
d. Tap Back to exit.
3. When ready to exercise, start your workout.
4. Push the On/Off LED button on the Heart Rate Armband. Be sure to only push the On/Off LED button once.
5. During your workout, the Heart Rate Armband may take up to 60 seconds to connect. When connected, the Bluetooth
Rate Device icon will be displayed along with your heart rate.
Note: The Armband can only be connected once to an active workout. If the On/Off LED button is pushed after being con-
nected, the workout must be restarted.
Use the values calculated or measured by the machine's computer for reference purposes only.
wireless connection must be activated. To activate Bluetooth
®
".
®
Assembly / Owner's Manual
Heart Rate (HR) Monitor. Follow the instructions provided with your
®
Heart Rate Armband, follow the instructions that were
®
icon is blue, then it is active.
®
wireless connection:
®
24
strap or other
®
armband or other
®
Heart
®