Emergency Stop; Lean Mode; Console Features - Nautilus Bowflex VeloCore Assembly And Owner's Manual

Emergency Stop

To stop the pedals immediately, push down hard on the Emergency Brake/Resistance Adjustment
Knob.
This bike cannot stop the Pedals independently of the Flywheel. Reduce the pace to
slow the Flywheel and Pedals to a stop. Do not dismount the bike until the Pedals have
come to a complete stop. Be aware that the moving Pedals can strike the backs of the
legs.
Resistance Adjustment
Turn the Emergency Brake/Resistance Adjustment Knob to adjust the resistance level. Clockwise will
increase the value, counter-clockwise will decrease the value.

Lean Mode

To unlock the leaning mode, push the button all the way down with an open hand. To lock the bike
in the stationary mode, pull up on the button until it clicks. Take a moment to practice unlocking and
locking the lean mode.
NOTICE: The bike must be upright in order for the Lean Lock Knob to engage in the locked position.
Do not attempt to set the Knob in a partially locked position.
Stationary mode (locked)
Console
Lean mode (unlocked)
19
Assembly / Owner's Manual
Incorrect setting (partially locked)
Console Display
Status LED