Datcon DT4200 Operating Instructions Manual page 75

DT4200


20181113-V0
Detailed description of the limit value operating modes

•
: Switched OFF [this is the default factory setting]
Independent of the measured value, the limit output is
always switched OFF.

•
: It switches ON, when: measured value ≥ low
limit
The output switches ON, if the displayed value ≥ numerical
value defined as the
In this operating mode the value of the
indifferent: it does not influence the operation of the output.
Example for the application:
Switching a cooling system ON above a given temperature
value.

.

parameter is
75