Table of Contents
Advertisement
DT4200
Hysteresis of the low
limit
Sequence of operations
View of the used terms
Hysteresis of the low
limit
Sequence of operations
20181113-V0
16. Keep stepping by pressing the ▲ button as long as you
see this sub-menu item:
means: the hysteresis of the low limit value. Here you can
define a numerical value which provides the hysteresis of
the low limit value (LL) by having added to and subtracted
from it. Consequently, the actual hysteresis is twice the
value defined here.
Comment: according to this drawing, the limit output is in
the
operating mode.
17. Enter by pressing the ENTER button.
18. You see this
L1.LH. It can be changed between 000 and 999. The digit at
the left side is blinking.
19. Pressing ► button you can select the next digit.
20. Pressing ▲ button you can increase the value of the
blinking digit:
,
,
,
,
21. After you have set the value of the hysteresis, press the
MENU button to exit from the sub-menu item, and you see
this:
.
22. If you had selected the
operating mode, there is no need to do further settings. For
finishing the operation, go on with the steps from the part:
Exit from the menu item.
. LH (Low Hysteresis)
on the display. This is the value of
,
,
,
,
,
or the
, etc.
limit-value
31
Advertisement
Table of Contents
