Table of Contents
Advertisement
DT4200
Sequence of operations
Exit from the menu item 1. After finishing the settings, press the MENU button to exit
Exit from the menu
20181113-V0
•
: Always on (ON)
It always displays the states of limit outputs.
If you keep the ENTER button pressed down, the
measurement results are displayed.
(This operating mode is useful when the states of limit
outputs is more important than the measured value.)
from the given menu item, and you see:
(2. If you want to change the settings you have done just
now, or if you just want to check what you have typed in, go
on with the operation from point 2 of the Sequence of
operations.)
(3. If you don't want to exit the menu (you want to do further
settings), then you may select the desired menu items by
pressing the ▲ button.)
1. Press the MENU button. First the mnemonic
(Save), then the mnemonic
display. With this the storing of the settings is completed.
The instrument has exited the menu and goes on with the
measurement.
(Exit) are shown on the
.
27
Advertisement
Table of Contents
