Datcon DT4200 Operating Instructions Manual page 13

DT4200
Connecting the cables
Wiring plan, connecting
the instrument as an
intermediate device
(see also "Application
example")
Be careful the polarity of
the cables.
Wiring plan, connecting
the limit outputs
(see also "Application
example")
Be careful the polarity of
the cables.
20181113-V0
•
The DT4200 is situated in the „middle" of the current loop.
In this case one cable comes from the signal source and
another cable goes to the processing unit(s).
The following figure shows this case.
13