c. Press "Test Lora Server" in Smart-Vue Pro LoRaWAN
page after infrastructure is added in webapp (This
only works once you configure your network properly
(as described in the Setting Up an Ethernet Con-
nection and Setting Up a Wi-Fi Connection to
your Network).
Figure 32. Smart-Vue Pro LoRaWAN Networking
5. Configuration in webapp.
a. In devices page, add the device name
(Smart-Vue Pro Quatro) which is under test.
Figure 33. Add the device name
Smart-Vue Pro LoRaWAN Enabled Receiver
Set Up Procedure |
23