Firmware Upgrade From Version 1.4.17 To 5.1.2 - Thermo Scientific Smart-Vue Pro User Manual

Firmware Upgrade from Version
1.4.17 to 5.1.2
This section provides specific information when upgrading
your gateway's firmware from version 1.4.17 to version 5.1.2.
To upgrade the firmware in your gateway, typically follow
notification from thermo fisher scientific or contact with our
technical support team, follow these steps:
1. Connect to your gateway with your login name and
password.
2. Select Administration  Firmware upgrade.
3. Select Choose Firmware Upgrade File and browse
your computer to locate the firmware file provided to you
by Smart-Vue Pro.
CAUTION: Use official firmware files provided by
thermo scientific.
4. Select Start upgrade and continue the process as
directed on the screen.
Figure 26. Normal Configuration Link
20 |

Firmware Upgrade from Version 1.4.17 to 5.1.2

5. When upgrading from 1.x.x firmware, this process resets
your previous LoRaWAN configuration. You must then
click LoRaWAN in the main menu, then click the Normal
Configuration link (1) on the right-hand side of the
screen to open Manual Configuration.
6. You may then proceed with LoRaWAN configuration as
described earlier. This specific behavior is caused by the
migration from firmware 1.x.x to 5.1.2. After this upgrade,
you should not have to perform this procedure again in
the future.
Smart-Vue Pro LoRaWAN Enabled Receiver
1