Table of Contents
Advertisement
Troubleshooting
How do I access the Smart-Vue Pro LoRaWAN
configuration page?
For the first time when you plug in your Smart-Vue Pro
LoRaWAN, use your web browser to connect to the
receiver's default IP address: http://192.168.2.1.
Once Wi-Fi or ethernet is successfully configured and saved
then use the IP address assigned to the Smart-Vue Pro
LoRaWAN to connect.
The assigned IP address for your Smart-Vue Pro LoRaWAN
can be seen on the home page of Smart-Vue Pro LoRaWAN.
Note the IP address for later use.
Figure 23. Smart-Vue Pro LoRaWAN configuration page
Can I test my Smart-Vue Pro LoRaWAN network
connection?
In the Setup
LoRa window (described in Smart-Vue Pro
LoRaWAN Configuration), is a Test LoRa Server button.
When you Click that button, you receive an acknowledgment
that the connection is up and running.
16 |
Troubleshooting
Why sensors connected to Smart-Vue Pro Quatro does
not get detected in the web application?
Sensors attached on Smart-Vue Pro Quatro sometimes may
not be detected due to the latency in the network which is
configured in Smart-Vue Pro LoRaWAN. If the latency is
greater than 200 mSec, then this issue occurs. Use the 'Test
LoRa Server' option to measure the latency.
Smart-Vue Pro LoRaWAN Enabled Receiver
Advertisement
Table of Contents
