Setting Up An Ethernet Connection - Thermo Scientific Smart-Vue Pro User Manual

5. You must restart the gateway services for the settings to
be saved. Click
restart the gateway.
6. Once the services are restarted, LoRaWAN networking
status is updated.
Setting Up an Ethernet
Connection
This section describes how to configure your receiver with an
Ethernet wired connection. The receiver does not require to
be placed in its final location for this operation, but it does
need to be accessible over your network.
1. Click Setup  Network Interfaces  Options (Edit)
for "eth0" (1).
10 | Setting Up your Receiver
on the left side to save and
Smart-Vue Pro LoRaWAN Enabled Receiver