Thermo Scientific Smart-Vue Pro User Manual page 12

Figure 13. Network interface configuration
a. Leave the settings to default and click Next to go to the
next screen. The detailed procedure to configure the
Ethernet is mentioned in "Setting Up an Ethernet
Connection".
7. Set up Remote Management.
a. This feature is not supported for the Smart-Vue Pro
solution so simply click Next to go to the next screen
without changing the settings.
8. Configure HTTP/HTTPS Access.
8 | Setting Up your Receiver
Figure 14. Access configuration
a. This feature is not supported for the Smart-Vue Pro
solution so click Next to go to the next screen without
changing the settings.
9. Set up Bootloader Protection by setting a u-boot
password.
Figure 15. Bootloader Protection
a. This feature is not supported for the Smart-Vue Pro
solution so click Next to go to the next screen without
changing the settings.
10. Click Finish.
11. To save your changes, click Save and Restart.
Smart-Vue Pro LoRaWAN Enabled Receiver