Important Precautions And Recommendations - Elba P60 Series Instruction For The Use - Installation Advice

IMPORTANT PRECAUTIONS AND RECOMMENDATIONS

✓ After having unpacked the appliance, check to ensure that it is not damaged.
If you have any doubts, do not use it and consult your supplier or a profession-
ally qualified technician.
✓ Packing elements (i.e. plastic bags, polystyrene foam, nails, packing straps, etc.)
should not be left around within easy reach of children, as these may cause seri-
ous injuries.
✓ The packaging material is recyclable and is marked with the recycling symbol
✓ Do not attempt to modify the technical characteristics of the appliance as this
may become dangerous to use.
✓ The appliance was designed for non-professional use by private individuals in
communal dwellings.
✓ The manufacturer cannot be considered responsible for damage caused by
unreasonable, incorrect or rash use of the appliance.
✓ If you should decide not to use this appliance any longer (or decide to substi-
tute an older model), before disposing of it, it is recommended that it be made
inoperative in an appropriate manner in accordance to health and environmental
protection regulations, ensuring in particular that all potentially hazardous parts
be made harmless, especially in relation to children who could play with old
appliances.
✓ The appliance should be installed and all the gas/electrical connections made by
a qualified engineer in compliance with local regulations in force and following
the manufacturer's instructions.
CAUTION:
If the burner is accidentally extinguished, turn the gas off at the control knob and wait
at least 1 minute before attempting to relight.
CAUTION:
Gas hobs produce heat and humidity in the environment in which they are installed.
Ensure that the cooking area is well ventilated by opening the natural ventilation grilles
or by installing an extractor hood connected to an outlet duct.
CAUTION:
If the hob is used for a prolonged time it may be necessary to provide further ventila-
tion by opening a window or by increasing the suction power of the extractor hood (if
fitted).
.
5