Figure 1-4 Encoder For Measuring Scanner Position On The Surface; Figure 1-5 Water Manifold - Olympus HSMT-Flex User Manual

DMTA034-01EN, Rev. B, March 2014
For the OmniScan MX, an optional adaptor is required (P/N: OMNI-A-ADP27). For
the TomoScan FOCUS LT, an optional cable is required (P/N: C1-LF-BXM-0.3M).
The HSMT-Flex scanner offers a total of six possible locations for the encoder on
the frame (see "Changing the Encoder Location" on page 25).

Figure 1-4 Encoder for measuring scanner position on the surface

Water manifold
Six outlets branch out from one main water intake to supply the wedges (see
Figure 1-5 on page 18).
18 Chapter 1
Six water outlets

Figure 1-5 Water manifold

Main water intake