DMTA069-01EN, Rev. D, March 2017
Figure 2-28 Magnetic wheels to hold the mouse scanner on ferromagnetic surface
2.10 Optional 20-Centimeter Bar and Lead Screw Kit
The 20-centimeter bar and lead-screw kit (P/N: CHAINSCAN-A-SBAR [U8775129])
allows for a very compact configuration of the scanner. It can be used with the mouse
conversion kit (P/N: CHAINSCAN-A-MOUSE [U8750037]) as shown in Figure 2-29
on page 47, as well as a with the chain assembly (see Figure 2-30 on page 48). These
configurations are convenient when minimum encumbrance is required.
The 20-centimeter bar and lead-screw kit includes the following:
•
One 20 cm (8 in.) slide bar
•
One 20 cm (8 in.) lead screw
46
Chapter 2