Access To The Scan Controls - Barco CINE7 Installation Manual

3.4.1

Access to the scan controls

How to get access
1. Turn both lock screws with a screwdriver or a coin counter clockwise.
2. Lift up and pivot the top cover. (image 3-4)
3. Support the top cover with the hand, no support is incorporated.
During some installations it will become handy to remove the top cover totally. Therefore, continue with step 6.
4. To open the chassis, loosen both indicated retaining screws. (image 3-5)
5. Turn the chassis to the front of the projector until it grips in its locks. (image 3-6)
6. Pivote the top cover ± 60 . (image 3-7)
7. Push the top cover to the front side of the projector until it jumps out of its hinges.
8. Turn the top cover till 90 and lift it up.
Image 3-4
Access to the scan controls
Image 3-5
Opening chassis
R5976585 BARCO CINE7 26022003
3. Installation Guidelines
13