Table of Contents
Advertisement
3. Installation Guidelines
Screens are rated by how much light they reflect (or transmit in the case of rear projection systems) given a determined amount
of light projected toward them. The 'GAIN' of a screen is the term used. Front and rear screens are both rated in terms of gain.
The gain of screens range from a white matte screen with a gain of 1 (x1) to a brushed aluminized screen with a gain of 10 (x10)
or more. The choice between higher and lower gain screens is largely a matter of personal preference and another consideration
called the Viewing angle. In considering the type of screen to choose, determine where the viewers will be located and go for the
highest gain screen possible. A high gain screen will provide a brighter picture but reduce the viewing angle. For more information
about screens, contact your local screen supplier.
Image Sizing
The projector is designed for projecting an image width from 1.4m (4.6') to 7m (23')The projector leaves the BARCO factory, adjusted
as a Front/Ceiling projector for a screen width of 2400 mm (94.5 inch) with an aspect ratio of 4 by 3 (The projector can be factory
aligned in other configurations if ordered).
Image 3-1
Image Sizing
Changing the image size from the projector preset size requires a realignment of the projector.
3.2 Configuration
Which configuration can be used?
The projector can be installed to project images in four different configurations:
•
Front/table
•
Rear/table
•
Front/ceiling
•
Rear/ceiling
10
R5976585 BARCO CINE7 26022003
Advertisement
Table of Contents
