Bernina Q 16 User Manual page 71

Fault
Machine not running
Neither the sewing light nor
the light on the free arm
lights up
Upper thread monitor doesn't
react
Bobbin thread monitor
doesn't react
Error during software update
Cause
Power switch to «0».
Switched off in the Setup
Program.
The sewing light is defect.
Switched off in the Setup
Program.
Switched off in the Setup
Program.
USB stick is not recognized.
Software update is blocked
(hourglass is inactive).
Update data is not recognized.
Remedy
> Set the power switch to «I».
> Get in contact with the specialist BERNINA dealer.
> Activate it in the Setup Program.
> Get in contact with the specialist BERNINA dealer.
> Activate it in the Setup Program.
> Activate it in the Setup Program.
> Use a BERNINA USB stick.
> Remove the stick and switch the machine off and on
again. Continue the update according to the
notification.
> Do not save update data in a folder.
> Unzip update data.
Errors and faults
71