Using The Single Stitch/Securing Function - Bernina Q 16 User Manual

Setting up the machine
> Select «Programmable functions» (1) on the sewing screen.
1
> Select the required function for the back kick.
1
2
> Close the window.

Using the single stitch/securing function

With «Single stitch/securing», you can trigger the following functions:
• Pull the bobbin thread upward with a single stitch.
• Sew a programmed number of securing stitches.
Prerequisite:
•
> To pull the bobbin thread up with a single stitch, briefly tap the foot control with your heel.
> To sew the programmed number of securing stitches, press the foot control down longer with your heel.
26
1
«Programmable functions»
1 2
«No function»
«Single stitch/securing»
– The function will be programmed. With each back kick on the foot control, the selected function will
be carried out.
The back kick is programmed with «Single stitch/securing». (see page 25)
2
2 «Kick-start»
3 4
3 «Raising/lowering the needle»
4 «Presser foot position»