Integrated Protection Mechanisms; Data Exchange; Configuration; Interface Parameters - Pilz PSSu K S RS232 Modbus ASCII Operating Manual

Function description
Schematic representation of signal processing with the control system PSSu PLC/PSSu
multi:
Head
module
with
control
system
4.2.2

Integrated protection mechanisms

When the PSSu E F PS1(-T) or PSSu E F PS2(-T)(-R) is used to supply the system, the
module supply is buffered for 20 ms if the supply voltage is interrupted.
The module detects the following errors:
Start-up error
}
Configuration error
}
ST communication error
}
Bus termination error
}
4.3

Data exchange

Data is exchanged between subscribers via a special protocol based on the Modbus ASCII
protocol.
4.4

Configuration

The module has the following configuration options:
Interface parameter
}
Threshold receive buffer
}
4.4.1

Interface parameters

The following interface parameters can be configured:
Transmission rate
}
Xon/Xoff when sending
}
Xon/Xoff when receiving
}
RTS and CTS enabled
}
Operating Manual PSSu K S RS232 Modbus ASCII
1001689-EN-05
Module
PSSu K S RS232
bus
Modbus ASCII
INFORMATION
The necessary function block is available from Technical Support (tele-
phone: +49 711 3409-444).
Ext. device
with serial
interface
RS232
12