SaMASZ KDT 180 Operator's Manual page 28

Fig. 19. Adjustment of swath guides: 1 - swath guide, 2 - locknuts, 3- arm adjustment screws, 4 - locknuts,
In order to set swath width, adjustment of swath guides (1) should be performed (Fig. 20)
(for: KDT 220 S, KDT 260 S, KDT 260 SL):
loosen eye screw (2) of the swath guide,
set the swath guide (1) as needed,
tighten screw (2),
even spreading of swath might be adjusted with wheels (3) the same as it is preformed with
guides.
Fig. 20. Adjustment of swath guides: 1- swath guide, 2 - adjustment screw, 3 - swath wheel
In order to set swath width, adjustment of swath guides (1) should be performed (Fig. 21)
(for: KDT 220 W, KDT 260 W):
loosen eye screw (2) of the swath guide,
set the swath guide (1) as needed,
tighten screw (2).
Operator's manual
1
5- shield adjustment screws, 6- guide arm, 7- shield
-
Rear disc mowers
KDT 180; KDT 220 S/W; KDT 260 S,SL/W;
KDT 300; KDT 340
2
7
1
2
-
26
3
6
4 5
1