Oven Set-Up - Blodgett Combi Manual Control BCM Service & Installation Manual

Display shows
setting
Not active
Display shows "U"
No.
Display shows
description of "U"
function
Display shows
setting
Confirmation of
special settings
To enter set-up mode, press hot-air key and steaming/preheating key for 2 sec.
To leave set-up mode, turn switch to the left. Change between set-up and test mode by
pressing combi-steam key.
The set-up mode is only intended for service engineers who wish to change the set-up of the
computer control of the oven model in question.
The program display shows a description of the "U" function in question.

Oven set-up

Power Switch
PRG
Not active
Press HOT AIR and
STEAMING for 2 sec.
Possible to change to
"d" test mode with
combi steam key
Press STEAMING/
PREHEATING and
HOT AIR for 2 sec.
Not active
Not active
Select "U" settings
with turn switch