Blodgett Combi Manual Control BCM Service & Installation Manual page 6

The oven should be checked before you start using it.
On the outside
Check that the oven has not been damaged in transit (dents, scratches, etc.)
•
Check/adjust the height and check that the oven is placed level (horizontally)
•
Check/adjust oven door
•
Connections
•
Check for correct water connection
•
Turn on water supply
•
Check for leaks
•
Turn off water supply
•
Check and clean dirt filter
•
Turn on water supply again
•
Check hand shower
•
Check for correct electrical connection
•
Check connection to drip tray
•
Check for correct mounting of drip tray
•
Check for correct fall of hose from drip tray, and check for leaks
•
Check for correct exhaust and drain connection
•
Clean oven
•
Apply steel oil
•
Oven chamber
•
Check that filter housing is mounted correctly
•
Check interior light
•
Clean oven
•
Operation panel
•
Check and adjust, if necessary, each of the preset values
•
Heat up the oven at 485°F (250°C) for approx. 5 min.
•
The installation checklist and the instruction checklist (appendices 1 and 2) should be
filled in and returned to BLODGETT 30 days after the installation, at the latest.
Checking before Use
Blodgett Fax # 802-652-2814
- 6 -