Table of Contents
Advertisement
Diagnostic mode allows you to navigate through all components to test
stic mode allows you to navigate through all components to test them without the oven
mode. To activate diagnostic mode, Press and hold the Hot Air and Combi keys
scroll the dial to the desired component
stage key will display 1 to activate that component
display 1 to activate that component, press the stage key again to deactivate it
Instructions to activate the chemical pump to prime it during the start up process.
Instructions to activate the chemical pump to prime it during the start up process.
Step 1. Press and hold the Hot Air and Combi
The Display will now show d 0 next to the
Step 2. Scroll the dial till d30 is displayed
The Display will show DELIME PMP next to the
Step 3. Press the Stage key once, 1 will be displayed
When pump has been primed, press the Stage key
BCM Blodgett Combi Oven
BCM START UP GUIDE
Diagnostic Mode
d - Level
Press and hold the Hot Air and Combi keys simultaneously
t displayed next to the PROG key and then press the
Combi keys simultaneously for 2 seconds.
the Probe key
ed next to the Probe key.
next to the PROG key.
1 will be displayed next to the stage key and the chemical pump will activate
press the Stage key once to 0 the pump will deactivate.
without the oven being in a cooking
simultaneously for 2 seconds then
tage key again to deactivate it 0 will be displayed.
and the chemical pump will activate.
the Stage key once. The
Press and
hold the Hot
Air & Combi
Keys for 2-3
seconds.
Page 1
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the Manual Control BCM and is the answer not in the manual?