Download Print this page

Wallbeds Australia AB-4a Assembly Instructions Manual page 4

Cam Pins Insert all Cam Locks into the following panels as described by the cabinet part located

on the cabinet sticker.

End

Left

Attach the runners prior to assembling the cabinetry.

Drawer Runners –

Line up the holes in the metal runner with the pre-drilled holes in the End Panel.

Attach these runners using the Euro screws. Do this for both End Panels- Refer to

images 1 & 2 page 10

Drawer Clips –

Insert these into the drawer front, ensuring the up & down arrows on the drawer clips are

facing the outside edge of the drawer panel. Fix these into the drawer front by tapping

them in gently with a hammer - Refer to image 10 page 11

End

Right

Bottom Panel

NOTE: In the

Bottom Panel Insert

the cam pins on the

opposite side to the

Cam Lock.

Drw Bot

Top Panel

NOTE: In the Top

Panel Insert the cam

pins on the same

side as the Cam

Lock