Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Wallbeds Australia Manuals
  4. Indoor Furnishing
  5. AB-4a
  6. Assembly instructions manual

Wallbeds Australia AB-4a Assembly Instructions Manual

Hide thumbs

Advertisement

Quick Links

Download this manual
• Please read and understand the instructions prior to assembly.
Incorrect installation of this product could possibly result in
personal injury or physical damage.
• WallBeds Australia recommends two people to safely assemble
and install the wall bed - It is not recommended you try to install
this bed on your own.
• The wall bed MUST be securely fastened to the wall prior to use.
Failure to do so will cause the bed to tip over & may cause
damage to the cabinet or serious personal injury.
• All additional cabinetry must be securely fasten to the Wall Bed
cabinet.
• Whilst these products are DIY it is recommended the wall bed be
installed by a qualified trades person if you are not comfortable
with the installation of this product.
©2019 WallBeds Australia
Important Safety Advice Sheet
PLEASE READ BEFORE YOU BEGIN:
WallBeds Australia is not responsible for any damages
or injuries incurred by incorrect installation of this
product.
1

Advertisement

loading

Related Manuals for Wallbeds Australia AB-4a

Summary of Contents for Wallbeds Australia AB-4a

  • Page 1 Incorrect installation of this product could possibly result in personal injury or physical damage. • WallBeds Australia recommends two people to safely assemble and install the wall bed - It is not recommended you try to install this bed on your own.
  • Page 2 Panel Stickers/Labels –Do not remove any cabinet stickers from the panels until the units have been built, as these will assist with assembly. Most of the stickers are placed on the “back” or underside of the cabinet and will not be seen once assembled. AB-4a Drawer Unit Panels End Left Back...
  • Page 3 AB-4a Drawer Unit Hardware Small Handle Drawer Clip Drawer Runners & Metal Drawer Sides 28mm Wood Screw Cam Pin Handle Fixing Screw Cam Lock Done Head Screw Euro Screw Step 1 – Inserting Drawer Unit Hardware Cam Locks – Insert all Cam Locks into the following panels as described by the cabinet part located on the cabinet sticker.
  • Page 4 Insert these into the drawer front, ensuring the up & down arrows on the drawer clips are facing the outside edge of the drawer panel. Fix these into the drawer front by tapping them in gently with a hammer - Refer to image 10 page 11 ©2019 WallBeds Australia...
  • Page 5 Step 2 Ab-4a Drawer Unit Assembly Start the cabinet assembly by using either one of the End Panels. Back Panel - Ensuring the cam locks are facing away from the inside. Place the cabinet back panel onto the side panel. Match up the cam locks with the cam pins. Tighten the cam locks and cam pins together by using a Phillips head hand screwdriver.
  • Page 6 AB-4a Upper Cabinet Assembly Instructions Note: If you have two of the same cabinet each cabinet will have a different cabinet number. Prior to assembly, separate and group all matching panels panel numbers. Panel Stickers/Labels –Do not remove any cabinet stickers from the panels until the units have been built, as these will assist with assembly.
  • Page 7 AB-4a Cabinet Hardware Parts Cam Lock Small Handle Cam Pin Handle Fixing Screw Shelf Pin Door Hinge Clip Door Hinge 28mm Wood Screw Step 1 – Inserting Cabinetry Hardware Cam Locks – Insert all Cam Locks into the following panels as described by the cabinet part located on the cabinet sticker.

  • Page 8: Step 2 - Cabinet Assembly

    Attaching the Drawer Unit to the Upper Cabinet - Remove the drawer, pre-drill a 5mm hole screw up through the top panel of the drawer unit into the base of the upper Cabinet. Attach the two units together using the 28mm screws supplied. ©2019 WallBeds Australia...

  • Page 9: Important Safety Information

    IMPORTANT SAFETY INFORMATION All WallBeds Australia Bookcases and Cabinets must be securely attached to the WallBed before use. Ensure that children DO NOT climb or hang on any part of the Bookcase or Cabinet.
  • Page 10 Image 2 Image 1 Image 3 Image 4 Image 5 ©2019 WallBeds Australia...
  • Page 11 Image 7 Image 6 Image 8 Image 9 Image 10 ©2019 WallBeds Australia...
  • Page 12 Image 12 Image 11 Image 13 Image 1 4 Image 15 Image 16 ©2019 WallBeds Australia...
  • Page 13 Top unit onto Lower unit. These images may not represent each individual product. IMPORTANT SAFETY INFORMATION All WallBeds Australia Bookcases and Cabinets must be securely attached to the WallBed before use. Ensure that children DO NOT climb or hang on any part of the Bookcase or Cabinet.