Download Print this page
Wallbeds Australia AB1 Assembly Instructions

Wallbeds Australia AB1 Assembly Instructions

Bookcase

Advertisement

Quick Links

AB1- Bookcase Assembly Instructions
Note: If you have two of the same cabinet each cabinet will have a different cabinet number.
Panel Stickers/Labels
–Do not remove any cabinet stickers from the panels until the
units have been built, as these will assist with assembly. Most of the stickers are placed
on the "back" or underside of the cabinet and will not be seen once assembled.
AB1 Bookcase Cabinetry Panels
End Panel
Back Panel
End Panel
Top & Bottom Panel
Kick Panel
Adjustable Shelf
1

Advertisement

loading

Summary of Contents for Wallbeds Australia AB1

  • Page 1 AB1- Bookcase Assembly Instructions Note: If you have two of the same cabinet each cabinet will have a different cabinet number. Panel Stickers/Labels –Do not remove any cabinet stickers from the panels until the units have been built, as these will assist with assembly. Most of the stickers are placed on the “back”...
  • Page 2 AB1 Hardware Parts Shelf Pin Cam Lock Cam Pin 28mm Wood Screw Step 1 – Inserting Hardware Cam Locks – Insert all Cam Locks into the following panels as described by the cabinet part located on the cabinet sticker. Rail...
  • Page 3 IMPORTANT SAFETY INFORMATION All WallBeds Australia Bookcases and Cabinets must be securely attached to the WallBed before use. Ensure that children DO NOT climb or hang on any part of the Bookcase Or Cabinet. Failure to do so may result in personal injury.